Control system Traditional analog type
Driver Dual inverter control
Outlet diameter φ 0.05-φ 0.12mm φ 0.1-φ 0.32mm φ 0.07-φ 0.25mm φ 0.25-φ 0.6mm φ 0.1-φ 0.6mm
Inlet diameter φ 0.15-φ 0.4mm φ 0.6-φ 1.2mm φ 0.5-φ 1.0mm φ 0.8-φ 1.6mm φ 0.6-φ 1.2mm
Drawing speed 1800mpm/max 2500mpm/max 2500mpm/max 1500mpm/max 2500mpm/max
Drawing dies no. 20 22 24 14 24
Slip ratio of m/c 10.5%+6% 15%+8% 13%+8% 15%+8% 15%+8%
Final slip ratio 0%-2%
Frame Ironed cast
capstan Ceramic coasted
Capstan traverse method Four capstans (vertical) Four capstans(horizontal)
Capstan dia.(max) Φ120mm Φ242mm Φ242mm Φ316mm Φ242mm
Fix speed capstan dia. Φ120mm Φ206mm Φ206mm Φ268mm Φ200mm
Bobbin size O.D.Φ300mm/max O.D.Φ380mm/max O.D.Φ380mm/max O.D.Φ380mm/max O.D.Φ630mm/Φ500mm
Bobbin loading & unloading type Shaft type
Traversing unit 50-100W synchroniz motor
Main motor 3.7KW 11KW 11KW 15KW 15KW
Spooler motor 2.2KW 3.7KW 3.7KW 3.7KW 3.7KW
Transmission type Flat belts
Revise system Weight balance by swing arm
Detecting device Weight balance type
Tension control 50KG/MAX
Max.loading capacity 30KG/MAX 50KG/MAX
Brake Magnetic brake
Lubricant type for bearing Without oil
Lubrication type Spray type
Power source 380v 50/60HZ
Lubricant oil capacity 25L/min
Machine dimension 1900*1350*1750 2050*1600*1900 2050*1600*1900 2600*1600*1900 2400*1352*1970
Machine weight 1900KG 2400KG 2400KG 2200KG 2800KG