Auto Optical fastener and nuts inspection machines
Nut inspection machine is designed with 3 CCD for standard screw/ nuts sorting.
Insert nut thread inspection.
PRODUCT FEATURE
Appling component: Nuts, rods and washer fastener
Sorting range: M1-M12 standard
Speed: Non-stop Inspection with High Speed 400~1000 parts per minute (depend on the part size and feeding speed)
Inspection criteria
fastener parts head width / height / pinhole depth / recess shape / burr in recess/ spiral thread / thread I.D. / thread E.D./ neck length / shank vertical / screw length / first thread / drunk thread / head crack / plating / insert nut thread / burr / dimension / etc.
Specification
Series No. EY-01
Appling component Nuts, rods and washer fastener
Diameter of component M1-M12 standard
Length of component 25mm
Head Width 25mm
No. of CCD 3 CCD
Vision system Highly magnified CCD camera / light source sets
Software Accuvision Pro-V II version 2.5
Supply and output Feeding bowl / linear track / sorting bins (Good/NG)
Speed 400~1000 pcs/min
Power AC 220 - 240V / 50Hz
Mainframe Industrial computer, MITSUBISHI servo motor, Industrial CCD, Telecentric lens
Machine spec. 1200mmL× 1000mmW× 1,800mmH
Fastener parts head width / height / pinhole depth / recess shape / burr in recess / spiral thread / thread I.D. / thread E.D./ neck/length / shank vertical / screw length / first thread / drunk thread / head crack / plating / insert nut thread / burr / dimension / etc.
