Material:
*The body: made with high strength casting material – keep the precision of the main frame after long running; the lifetime of header can be longer; The supplier of transmission gear and rod are the same with the car’s, with high precision and low noise.
*Main parts of the equipment are imported fromTaiwan, Japan and Germany, to ensure high precision, hardness and high abrasion resistant of the equipment.
System design:
*Extending the life of the equipment: Forced oil lubrication system. * 3 direction (X,Y,Z) adjustment of stationary die pocket makes the alignment of height and parallelism between stationary and moving die much easier.
*Blank pushing time can be adjusted by rotating a cam to coincide moving time of rolling die. *Rough material inthe guide track feeding speed electric control mode can be used arbitrarily adjusted to cater for different sizes and materials products, the best prodcution rate. (speed frequency transformer and fast brakes can be chosen)
*Semi-open design: easy for equipment maintenance.
*Cooling system:Fored cooling;
*Electrical control:centralized control to reduce defective products.
* Motor: made withenergy saving motor (electricity can be saved around 20%).
| Specification/Model | CY06050(rolling) | CY06050 (shaking device) | CY06076 (shaking device) | CY0880 (shaking device) |
| MAX DIA(mm) | 6 | 6 | 6 | 8 |
| MAX LENGTH(mm) | 50 | 50 | 76 | 80 |
MOVING/STATIONARY DIES SIZE(mm) | 105/90X25 | 105/90X25 | 127/108X25 | 140/127X25 |
| MAJOR MOTOR | 5HP(4KW) | 5HP(4KW) | 7.5HP(5.5KW) | 7.5HP(5.5KW) |
ASSISTANT MOTOR MOTOR | 1/4HP)180W) | |||
| LUBRICATING OIL PUMP | 25 | 25 | 25 | 25 |
| COOLING OIL PUMP | 1/8HP(90W) | 1/8HP(90W) | 1/8HP(90W) | 1/8HP(90W) |
| CAPACITY(pcs/min) | 190-220 | 190-220 | 130-210 | 100-140 |
MACHINE DIMENSION (LXWXH)(cm) | 190X150X160 | 190X150X160 | 190X150X160 | 246X156X120 |
| WEIGHT(kg) | 1250 | 1250 | 2000 | 3000 |
* Specification subject to change without future notice.
