Feature:
For M8~M16 screws and bolts, under head length less than 150mm
Available for 2~8 cameras
Flange nuts and rivets can be applied on this model
Optional: Laser detector to inspect thread presence
Optional: Rotating mechanism to inspect recess depth or broken pin
Optional: wheel crack checking system (LS-1501) for head crack inspection
Optional: bottom sorting system (LS-1503) for inspecting cutter presence
Optional: Bending checking module
Optional: 360° rotation module for thread damage inspection
Optional: two kinds of Eddy current systems:
1. For head open crack inspection
2. Material mix-up or with/without heat-treatment
Sorting items:
• Screw-head height, width • Recess depth • Pinhole Excess Material
• Ineffective thread length • Minor Thread Diameter • Feature Angle
• Major Thread Diameter • Pitch Distance • Feature No.
• Bevel Thread • Screw Length • Feature Similarity
• Cone Point • Zinc:Yes or No（Head Top View） • Feature Length
• Pinhole Alignment • Head Crack • AF/AC
• Head Mark • Roundness • Material Mix-up
• Inner Roundness • Inner Concentricity • Broken pin
• Inner Excess Material • Shorten AF • Deformed Thread
• Feature-Center Distance
Optional Function:
Bottom Sorting
• 360° Thread Damage • Head Wheel Crack •Screw Bending (Multi-Images)
Specifications:
• Wire Diameter: φ8~16mm • Wire Diameter: φ8~16mm
• Length Under Head: 15~150mm • Sorting Precision: ±1 pixel
• Head Height: 2~25mm • Sorting Speed: 100~1000/PPM
