Pressure riveting nut, pressure riveting nut technical parameters, pressure riveting nut application guide
Basic description of pressure riveting nuts
Pressure riveting nut is a new type of fastener, mainly used on thin metal plates to provide high-strength threads, supporting and fixing circuit boards.
Features of pressure riveting nuts
The rivet nut is round, one end is cylindrical, and the other end has embossed teeth. The embossed teeth are used to squeeze the board. The end of the overwhelmed board is completely flat with the board, and no trace of operation can be seen. , The other end is exposed outside the board to support the circuit board. It has simple installation process, low cost and small appearance.
Parameter specification of pressure riveting nut
Commonly used models of pressure riveting nuts: M2.5-M12. Due to different threads, their opening size, height and other parameters are different. The following describes the parameters one by one:
Because of their different board thicknesses, there are many models. M3-M5 is used on the 0.8-1MM board with the code name -0. The code used on the 1-1.4MM board is -1, which is larger than the 1.4MM board. For thick ones, use -2 M6 pressure riveting nuts on 1.2-1.4mm boards with -0. Use -1 for 1.4-2.3mm plates, use -1 for plates greater than 2.3MM, use -2. Pressure riveting nuts material; carbon steel 12L15 stainless steel 303 material Stainless iron 416 material pressure riveting nut code designation; carbon steel S stainless steel CLS stainless iron SP
Pressure riveting bottom hole: the bottom holes of M2, M2.5, and M3 are all 4.3MM. The value of the nut is 4.22MM, the C value of the nut is M4 and the bottom hole is 5.4MM, and the value of the nut is 5.38MM. The bottom hole of the M5 is 6.4MM. , The value of the nut is the bottom hole of the C value of the nut. The value of the nut is 6.38MM. D, SP type pressure riveting nuts: specially used for pressing stainless steel materials. This type of rivet nut is specially used for pressing stainless steel materials. Type of pressure riveting nut: the same as the metric system except for the grain size. The indication method is except thread gauge 4, the description of the expression method of the pressure riveting nut, take S-M3-1-ZI as an example, and the description of the expression method of the pressure riveting nut, as an example: S-M3-1-ZI: indicates 1. The material is Carbon steel (ordinary steel), the material is carbon steel (ordinary steel) 2. The thread specification is, the thread specification is M3 3. -1 means the value of the nut means the A value of the nut means the value of the nut is 0.97MM, Suitable for plate thickness, suitable for products with plate thickness of 1.0-1.2mm 4. Pressure riveting nuts with white zinc-plated surface treatment. The surface treatment is white zinc-plated pressure riveting nuts. Shank code (0-suitable for plate thickness 0.8mm, 1-suitable for plate thickness 1.0-1.2mm, 2-suitable for plate Note: handle code is suitable for plate thickness 1.5-2.0mm )
Applicable scope of pressure riveting nut
Mainly used in sheet metal chassis, cabinets, electronic equipment, communication equipment, aerospace, auto parts, ships, furniture, home appliances, etc.
Pressure riveting nut testing and certification
The pressure riveting nuts produced by our factory are all tested, and there are a group of excellent quality inspectors who are responsible for product testing.
Packing instructions for pressure riveting nuts
Plastic bag + carton
